Raptor Shift Light
In an effort to improve consistency I decided to install a Raptor shift light in to Project Orange Krush. I chose this particular unit for its compact size, simple hookup, and its ability to also act as a launch RPM light as well as a shift light. I'm extremely happy with the choice.
![](images/challenger_raptor_web_03.jpg)
For this modification you'll need:
Raptor Shift Light
Soldering Iron
Wire Stripper
Heat Shrink
Wire Loom
Zip Ties
Dash Pry Tools
10mm and 14mm sockets
Socket wrench or impact driver
Patience for running wire :)
Difficulty Rating: ![Tool Icon Half](../../images/tools_icon_full.jpg)
![Tool Icon None](../../images/tools_icon_none.jpg)
![Tool Icon None](../../images/tools_icon_none.jpg)
![Tool Icon None](../../images/tools_icon_none.jpg)
![Tool Icon None](../../images/tools_icon_none.jpg)
![](images/challenger_raptor_web_01.jpg)
![](images/challenger_raptor_web_02.jpg)
![](images/challenger_raptor_web_08.jpg)
![](images/challenger_raptor_web_05.jpg)